Language
  Home   Products   Applications   Support   Corporate   Contact us    
System Division
 
Scientific Cameras
Gated ICCD Cameras
Bio Imaging Instruments
Machine Vision
Ultra Fast
Non-Destructive Testing / X-ray
Semiconductor Industry
Systems for solar device evaluation
Electro- and Photoluminescence analysis
Si-Ingot inspection
Product list
Parametric Search
Request Info
Thermal analysis
Microscopic analysis
Spectroscopic analysis
Process analysis
Laser & Fiber Optic Measurement
Spectroscopy
Biomedical Research
Drug Discovery Instruments / FDSS
Virtual Microscopy / NanoZoomer
Software
Learning Center
Go to previous product



Part NumberName of productAbstract
C10000-401Time Delay Integration Camera2048 x 128, 4 TAP, high speed, high sensitivity, low noise, back-thinned TDI with a line rate of up to 50 kHz


Click image to enlarge
The C10000-301,-401 TDI camera is useful for a wide range of imaging applications requiring high speed operation with high sensitivity simultaneously. TDI is a special image acquisition method that has been used extensively in machine vision applications for industrial inspection. TDI imaging is appropriate for applications where it is desired to record a linear process over time, or where the aspect ratio of the subject being imaged is significantly asymetric. TDI is particularly useful for low light level scanning applications for which a typical line scan camera can not make a useful image. Also, frame readout mode is available for easy focusing.
 
 Datasheet:  155 KB  
 
 
Key Specifications Typical Spectral Response

Part Number C10000-401
Name of product Time Delay Integration Camera
Features
  • 2048(H) spatial resolution with 128(V), 4TAP TDI stages
  • Line rates up to 50 kHz
  • High speed imaging combined with high sensitivity & low noise
  • Great spectra response for UV-NIR with back thinned CCD
  • 100% fill factor
  • 100x anti-blooming with lateral overflow drain
  • Dynamic range of 667:1
  • 12 bit / 8 bit selectable A/D converter
  • Bi-directional scanning operation
  • Frame readout mode for easy focusing
  • Real time shading correction with internal DSP
Applications
  • High speed imaging for low light applications i.e. fluorescence imaging
  • Electronics manufacturing and inspection
  • Semiconductor inspection
  • High speed scanning for a large size sample, i.e. Flat Panel Displays
Imaging device Progressive interline transfer CCD
Wavelength (min.) 200 nm
Wavelength (max.) 1200 nm
Active pixels 2048(H) x 128(V)
Pixel size 12(H) x 12(V) Âµm
Active sensor area 24.58(H) x 1.536(V) mm
Pixel clock rate (max.) 30 MHz
Frame rate (max.) 50kHz Line Rate  fps
Full well capacity 80,000 e-
Read noise (min.) 100 e-r.m.s.
A/D converter 8 / 12 bit
Dynamic range 800:1
Cooling method Air
Data interface Camera Link
Hamamatsu DCAM driver Yes
Monochrome or color monochrome
Contrast enhancement 1-5 times (16 steps)
Lens mount F-mount
Power consumption DC +12V / 21 VA
Related products C10000 series
Related Products 1


Click image to enlarge

 

   


 
© Hamamatsu Corporation. Customer privacy is important, please read our privacy statement.Please send comments/questions about this page to the Webmaster.